Kamal Metal Industries
Kamal Metal Industries
Amraiwadi, Ahmedabad, Gujarat
GST No. 24AADFK2195F1ZJ
TrustSEAL Verified
Call 08048762745 94% Response Rate
SEND EMAIL

Universal and Mechanical Testing Machines

Our clients are offered with an extensive range of Universal and Mechanical Testing machines that are widely used by all our clients. These are fabricated out of the best quality of raw materials so that they ensure to serve for the best possible time. Our range of universal and mechanical testing machines include, yarn testing machines, mechanical tensile testing machines, tensile testing machines, computerized testing machines and universal testing machines. All these are further explained in detail below:

Universal Spring Testing Machines

Universal Spring Testing Machines
  • Universal Spring Testing Machines
  • Universal Spring Testing Machines
Ask For Price
Product Price :Get Latest Price

Product Details:

Model Name/Number201T
BrandKMI
Capacity1kgf to 200KN
MaterialALL
PhaseSingle
Driving MethodGear ,motor
Place Of OriginINDIA
Speed50MM/min to 500MM Or 30MM/Min to 300MM,OR 10Mm/Min to 100MM
Measuring Range1kgf to 200KN
Capactiy100 KN
Accuracy+ 1% of the verification load OR + 0.2% of rated capacity of range employed, which-ever is greater.
Material for ConstructionMS,SS,Others

Universal Spring Testing Machines


1. Machine.
Computer controlled equipment to test tensile strength and elongation of a wide range of materials. Compression, Bending,Flexural, Shearing Peeling, Tear & other tests are possible through special grips & fixtures.

2. Force Measurement.

By Electronic Load Cells of high accuracy. Two Load-cells are included, One each for higher and lower strength material.

3. Elongation Measuring Device.

Built-in Device. Measurement through cross - head movement by incremental encoder. For range & resolution,refer specification table.

4. Batch Test Facility.

For a Batch test - can furnish statistical analysis report in regard to minimum, maximum, mean and C.V% of strength and elongation.

5. Cyclic Test Facility.

Particularly Suitable For rubber belting .Automatic loading and unloading of specimen for desired number of cycles.( Maximum 999 cycles) Specimen can be stretched between given load or elongation limit - with 5% tolerance.

6. Proof Test Facility.

Direct indication of proof load at selectable percentage of specimen gauge length.

7. Measuring Unit.

Force Value Display in gm & kgf and print-out in selectable unit - gm, kg, N, cN, kN Or Lbs.

Elongation. Display in mm and printout in mm or Inch.

8. Test Result.

Display. During test all relevant test data including Load - Elongation Curve displayed on Computer screen. Print-out Test Report with Load - Elongation Curve can be had on completion of test .

9. Graph.

Load v/s Elongation & Stress V/S strain graphs. Auto scaling before print out. Special graph against specific need can be provided.

For desired force value , corresponding elongation value & vice-versa can be directly seen on screen.

10. Cross-head Drive & Speeds.

Variable test speed through variable frequency A.C.Drive.

For speed range refer table. Speed selection through computer key board.

Other speeds can be offered, On cost basis against specific requirement
11.Testing Lower Strength Materials.

For testing lower strength material additional load-cell can be provided on cost basis.

12. Protections.

Overload & Over travel protection. Automatic stopping on specimen ruptures.

13. Accuracy.

Complying IS 1828 ( part 1) : 1991 /ISO 7500 – 1 : 1986

Request
Callback


Additional Information:

  • Item Code: UTM001
Yes! I am Interested

KMI Universal Testing Equipment

KMI Universal Testing Equipment
  • KMI Universal Testing Equipment
  • KMI Universal Testing Equipment
  • KMI Universal Testing Equipment
Ask For Price
Product Price :Get Latest Price

Product Details:

Minimum Order Quantity1 Unit
Model Name/Number201T
MaterialKMI ALL
Automation GradeAutomatic
Place Of OriginAHMEDABAD INDIA
Speed50mm/min to 500mm/min
Computer SupportYes
Brandkmi
Capacity100KN
Material for ConstructionM S
Accuracy+/- 1%

We are manufacturing and supplying high precision Universal Testing Machines that are used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal and other material. With capacity upto 100 KN, it can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.



Features
:-

1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

2) Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

3 )Speed of the machine can be regulated through computerized systems.

4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost.

Request
Callback


Additional Information:

  • Packaging Details: Wooden Box
Yes! I am Interested

Advance Universal Testing Machine

Advance Universal Testing Machine
  • Advance Universal Testing Machine
  • Advance Universal Testing Machine
  • Advance Universal Testing Machine
Ask For Price
Product Price :Get Latest Price

Product Details:

Effective tensile stroke 600 to 1000mm
Maximum load 100KN
Accurate grade Accuracy Class 1.0/.05
Effective measuring range 2% to 100%
Measuring accuracy + 1 of load or 0.2% of full scale
Tester resolution 4000 Count in each measuring rage
Effective testing width 450mm
Range of testing speed 10% to 100%

We are into the business of manufacturing and supplying a qualitative range of Advance Universal Testing Machine. Owing to our quality centric approach, we make use of high grade components sourced from the trusted vendors of the industry for manufacturing these machines. We also make sure that these machines are in compliance with the industrial standards. We have reasonably priced our range.
Request
Callback
Yes! I am Interested

Tests On Universal Testing Machine

Tests On Universal Testing Machine
  • Tests On Universal Testing Machine
  • Tests On Universal Testing Machine
  • Tests On Universal Testing Machine
Ask For Price
Product Price :Get Latest Price

Product Details:

Model Name/Number201T
MaterialALL
Automation GradeAutomatic
Driving MethodGear ,Motor
Accuracy+/- 1% As per Is 1828
Place Of OriginINDIA
Capacity200KN
BrandKMI
Material for ConstructionMS,SS,Others
Accuracy+/- 1% As per IS 1828

We are manufacturing and supplying high precision Universal Testing Machines. It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results. The range includes :

  • Computerized Universal Testing Machine with Hydraulic Straining Unit
  • Micro Processor based version is also available

Used for
:

Determining tensile strength and elongation of
    • Textile
    • Rubber
    • Plastic
    • Cables And Conductors
    • Leather
    • Asbestos
    • Paper
    • Plywood
    • Metal And Other Material
    Request
    Callback
    Yes! I am Interested

    Packaging Universal Tester

    Packaging Universal Tester
    • Packaging Universal Tester
    • Packaging Universal Tester
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Model Name/Number201T
    Capacity1kgf to 200Kn
    SizeDepending upon Capacity of machine
    MaterialALL
    Automation GradeAutomatic
    PhaseSingle
    Accuracy+/- 1% As per IS1828
    PowerDepending upon Capacity of machine
    Place Of OriginINDIA
    WeightDepending upon Capacity of machine
    VoltageDepending upon Capacity of machine
    SpeedDepending upon Capacity of machine
    Measuring RangeDepending upon Capacity of machine
    Ram StrokeDepending upon Capacity of machine
    Display Typecomputerized
    Machine Type201T
    Test RangeDepending upon Capacity of machine
    Load Resolution4000 counts in each ranges
    Controlcomputerized
    Radius Of Punch TopDepending upon Capacity of machine
    Max Crosshead StrokeDepending upon Capacity of machine
    Crosshead Displacement MeasurementDepending upon Capacity of machine
    Load Measuring Accuracy+/- 1% As per IS 1828
    Cross TravelDepending upon Capacity of machine
    BrandKMI
    Capactiy200KN
    Accuracy+/- 1% As per IS 1828
    Material for ConstructionMS,SS,others
    Power SourceElectric
    BrandKMI

    We into the business of manufacturing and supplying a qualitative range of Packaging Universal Tester. Owing to our quality centric approach,we use high grade components sourced from the trusted vendors of the industry for manufacturing these machines. We also make sure that these machines are in compliance with the industrial standards. We have reasonably priced our range.

    This machine is used to perform :-

    • Tensile test
    • Compression test
    • Bending and shear tests
    • Hardness test on metals.


    The above test can be done both in form of test pieces and as finished products as well.

    Request
    Callback
    Yes! I am Interested

    Standard Universal Testing Machine

    Standard Universal Testing Machine
    • Standard Universal Testing Machine
    • Standard Universal Testing Machine
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Piece
    Model Name/Number201T
    MaterialALL
    Automation GradeAutomatic
    Accuracy+ /-1/% As per IS 1828
    Power230V AC + 10%, Single Phase 50 Hz. / 415V A.C. three Phase + 10%
    Place Of OriginINDIA
    Speed30MM/Min To 300MM/Min Or 50MM/Min to 500MM/Min
    Measuring Range20KN To 200KN
    Capacity200KN
    BrandKMI
    Material for ConstructionMS,SS,Other
    Computer SupportAvailable
    Power SourceElectric

    We are manufacturing and supplying high precision Standard Universal Testing Machine that are used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal and other material. It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.

    Features:-

    1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

    2) Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

    3) Speed of the machine can be regulated through computerized systems.

    4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost.

    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit)
    • Delivery Time: 6 to 8 Weeks
    • Packaging Details: Wooden Case
    Yes! I am Interested

    Universal Testing Equipment

    Universal Testing Equipment
    • Universal Testing Equipment
    • Universal Testing Equipment
    Ask For Price
    Product Price :Get Latest Price
    Product Brochure

    Product Details:

    Minimum Order Quantity1 Piece
    Model Name/Number201T
    MaterialALL
    Accuracy+/- 1% As per IS 1828
    Power230V AC + 10%, Single Phase 50 Hz. / 415V A.C. three Phase + 10%
    Place Of OriginINDIA
    Speed30MM/Min To 300MM/Min Or 50MM/Min to 500MM/Min
    Measuring Range1KN To 10KN
    Machine Type201T
    Test Range1KN to 10KN
    Load Resolution4000 counts for each range
    Controlcomputerized
    Max Crosshead Stroke900MM
    Crosshead Displacement Measurement25 MM to 900MM
    Load Measuring Accuracy+/- 1% As per IS 1828
    Cross Travel25mm to 900MM
    Computer SupportYes
    BrandKMI
    Capacity10 KN
    Computer SupportAvailable
    Accuracy+/- 1% As per IS 1828
    BrandKMI

    Universal Testing Equipment

    We are manufacturing and supplying high precision Universal Testing Equipment. It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.


    Used for
    :-

    Universal Testing Equipment helps in determining tensile strength and elongation of

    • Textile
    • Rubber
    • Plastic
    • Cables And Conductors
    • Leather
    • Asbestos
    • Paper
    • Plywood
    • Metal And Other Material
    Request
    Callback


    Additional Information:

    • Item Code: UniversalTestingEquipment
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
    • Port of Dispatch: Kandla
    • Production Capacity: 20 Per Month
    • Delivery Time: 6 to 8 Weeks
    • Packaging Details: Wooden Case
    Yes! I am Interested

    Universal Tester

    Universal Tester
    • Universal Tester
    • Universal Tester
    • Universal Tester
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Set
    Model Name/Number201T
    Capacity100KN
    Automation GradeAutomatic
    MaterialAll
    Power230V AC + 10%, Single Phase 50 Hz. / 415V A.C. three Phase + 10%
    Place Of OriginIndia
    Speed10MM/Min to 100MM/MIn
    Capactiy100KN
    Power SourceElectric
    BrandKMI
    Material for ConstructionMS,SS,Others
    Accuracy+/- 1%

    We are leading manufacturer and exporter of high precision range of testing equipment like Universal Tester for all type of materials, over 3 decades with more than 10000 satisfied customer all over the world.


    Used for
    :-

    Determining tensile strength and elongation of

    • textile
    • rubber
    • plastic
    • cables and conductors
    • leather
    • asbestos
    • paper
    • plywood
    • metal and other material
    Request
    Callback


    Additional Information:

    • Item Code: UniversalTester
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
    • Port of Dispatch: MUNDRA
    • Production Capacity: 20 PER MONTH
    • Delivery Time: 6/8 WEEKS
    • Packaging Details: wooden box.
    Yes! I am Interested

    Digital Standard Universal Testing Machine

    Digital Standard Universal Testing Machine
    • Digital Standard Universal Testing Machine
    • Digital Standard Universal Testing Machine
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandKMI
    Model Name/NumberNT106
    MaterialALL
    Automation GradeAutomatic
    Display TypeDigital
    Capacity100KN
    Material for ConstructionMS,SS,Others
    DisplayDigital
    Accuracy+/- 1%

    Digital Standard Universal Testing Machine


    We are leading manufacturer and exporter of high precision range of testing equipment and machineries for all type of materials, over 3 decades with more than 10000 satisfied customer all over the world.Our clients are offered with an extensive range of Digital Standard Universal Testing Machine that are widely used by all our clients. These are fabricated out of the best quality of raw materials so that they ensure to serve for the best possible time. Our range of universal and mechanical testing machines include, yarn testing machines, mechanical tensile testing machines, tensile testing machines, computerized testing machines and universal testing machines.


    We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results. The range includes :

    Computerized Universal Testing Machine with Hydraulic Straining Unit

    Micro Processor based version is also available

    1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

    2) Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

    3)Speed of the machine can be regulated through computerized systems.

    4)Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost
    5)High Quality
    6)Competitive Price
    7)More than 10000 satisfied clients

    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit)
    Yes! I am Interested

    Digital Universal Testing Equipment

    Digital Universal Testing Equipment
    • Digital Universal Testing Equipment
    • Digital Universal Testing Equipment
    • Digital Universal Testing Equipment
    Ask For Price
    Product Price :Get Latest Price
    Product Brochure

    Product Details:

    Minimum Order Quantity1 Set
    BrandKMI
    Model Name/Number201T
    MaterialALL
    Automation GradeAutomatic
    Display TypeComputerized
    Accuracy+/-1% As per IS 1828
    Capacity100 kN
    Accuracy+/- 1% As per IS 1828
    BrandKMI
    Material for ConstructionMS,Ss,others

    We are readily engaged in delivering Digital Universal Testing Equipment to our clients. The offered range of digital universal testing machines is made utilizing high grade raw material and innovative techniques in strict compliance with the international quality norms. Along with this, the offered range of digital universal testing machines is suitably checked on different characteristics to ensure that defect-free products are delivered at customers' premises.

     

    Features:

    • Durable
    • Exceptional performance
    • Reliable

    1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

    2)Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

    3) Speed of the machine can be regulated through computerized systems.

    4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost

    Request
    Callback


    Additional Information:

    • Item Code: DigitalUniversalTestingEquipment
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
    • Port of Dispatch: MUNDRA
    • Production Capacity: 20 PER MONTH
    • Delivery Time: 6/8 WEEKS
    • Packaging Details: Wooden Box
    Yes! I am Interested

    Industrial Universal Material Testing Equipment

    Industrial Universal Material Testing Equipment
    • Industrial Universal Material Testing Equipment
    • Industrial Universal Material Testing Equipment
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Unit
    Model Name/NumberKMI
    MaterialMild Steel
    Automation GradeAutomatic
    Place Of OriginINDIA
    Machine TypeComputer control
    Computer SupportYes
    BrandKMI
    Capacity100KN
    Accuracy+/- 1%
    Brandkmi

    We are manufacturing and supplying high precision Industrial Universal material Testing Equipment. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.

    Used for :-Determining tensile strength and elongation of

    • Textile
    • Rubber
    • Plastic
    • Cables and conductors
    • Leather
    • Asbestos
    • Paper
    • Plywood
    • Metal and other material
    Request
    Callback


    Additional Information:

    • Item Code: KMI
    • Packaging Details: Wiiden Box
    Yes! I am Interested

    Universal Material Tensile Testing Machine by kmi

    Universal Material Tensile Testing Machine by kmi
    • Universal Material Tensile Testing Machine by kmi
    • Universal Material Tensile Testing Machine by kmi
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Model Name/Number201T
    MaterialALL
    Automation GradeAutomatic
    Operating ModeAutomatic
    Number Of Load CellsTWO
    Number Of ScrewsTWO
    Resolution4000 counts in each range
    Brandkmi
    Capacity200 kN
    Material for ConstructionMS,SS,Others
    Power SourceElectric

    Universal Material Tensile Testing Machine by kmi are electrically operated machines capable of determining tensile strength and elongation of Textile, Rubber, Plastic, Cables and Conductors, Leather, Asbestos, Paper, Plywood, Metal, and other materials.

    Can test materials in conformity with IS or other standard.

    1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

    2) Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

    3)Speed of the machine can be regulated through computerized systems.

    4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost.

    Request
    Callback
    Yes! I am Interested

    UTM Universal Testing Equipment

    UTM Universal Testing Equipment
    • UTM Universal Testing Equipment
    • UTM Universal Testing Equipment
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    Minimum Order Quantity1 Unit
    Model Name/Number201T
    MaterialMild Steel
    Automation GradeAutomatic
    Place Of OriginAhmedabad India
    Weight950Kg
    Speed30mm/min to 300 mm/min
    Computer SupportYes
    BrandKMI
    Capacity50KN
    Material for ConstructionMS
    Brandkmi
    Accuracy+/- 1%

    We are manufacturing and supplying high precision Universal Testing Machines that are used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal and other material. With capacity upto100 KN, it can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.

    1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

    2)Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

    3) Speed of the machine can be regulated through computerized systems.

    4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost

    Request
    Callback


    Additional Information:

    • Packaging Details: Wooden Box
    Yes! I am Interested

    Digital Universal Material Testing Machines

    Digital Universal Material Testing Machines
    • Digital Universal Material Testing Machines
    • Digital Universal Material Testing Machines
    • Digital Universal Material Testing Machines
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    BrandKMI
    Usage/ApplicationALL
    CapacityUp to 200KN
    Model Name/Number201T
    Capactiy200KN
    Power SourceElectric
    BrandKMI
    Accuracy+/- 1% As per IS 1828

    Digital Universal Material Testing Machines Specification

    Machine
    • Computer controlled equipment to test tensile strength and elongation of a wide range of materials. Compression, bending flexural, shearing, peeling, tear & other tests are possible through special grips & fixtures

    Force Measurement
    • By electronic load cells of high accuracy. Two load-cells are included, one each for higher and lower strength material

    Elongation Measuring Device
    • Built-in device. Measurement through cross - head movement by incremental encoder. For range & resolution, refer specification table

    Batch Test Facility
    • For a Batch test - can furnish statistical analysis report in regard to minimum, maximum, mean and C.V% of strength and elongation

    Cyclic Test Facility
    • Particularly suitable for rubber belting. Automatic loading and unloading of specimen for desired number of cycles.( Maximum 999 cycles). Specimen can be stretched between given load or elongation limit - with 5% tolerance

    Proof Test Facility
    • Direct indication of proof load at selectable percentage of specimen gauge length.

    Measuring Unit
    • Force Value Display in gm & kgf and print-out in selectable unit - gm, kg, N, cN, kN Or Lbs. Elongation. Display in mm and printout in mm or inch

    Test Result
    • Display, during test all relevant test data including Load - Elongation Curve displayed on computer screen. Print-out test report with load - Elongation Curve can be had on completion of test

    Graph
    • Load v/s Elongation & stress V/S strain graphs. Auto scaling before print out. Special graph against specific need can be provided. For desired force value , corresponding elongation value & vice-versa can be directly seen on screen

    Cross-head Drive & Speeds
    • Variable test speed through variable frequency A.C.Drive. For speed range refer table. Speed selection through computer key board. Other speeds can be offered, On cost basis against specific requirement

    Testing Lower Strength Materials.
    • For testing lower strength material additional load-cell can be provided on cost basis

    Protections
    • Overload & Over travel protection. Automatic stopping on specimen ruptures

    Accuracy
    .
    • + 1% of the verification load OR + 0.2% of rated capacity of range employed, which-ever is greater. Complying IS 1828 ( part 1) : 1991 /ISO 7500 – 1 : 1986
      Request
      Callback
      Yes! I am Interested

      Utm Machine KMI

      Utm Machine KMI
      • Utm Machine KMI
      • Utm Machine KMI
      Ask For Price
      Product Price :Get Latest Price
      Product Brochure

      Product Details:

      Minimum Order Quantity1 Set
      Machine TypeUTM Machine
      Model Name/Number201T
      Automation GradeAutomatic
      Driving MethodGear,Motor
      Accuracy+/- 1% As per IS 1828,+/-1% As per Is 1828
      PowerSingle Phase
      Brandkmi,KMI
      Place Of OriginINDIA
      Country of OriginMade in India
      ApplicationUse for Plastic, rubber , metal
      CapacityUpto 200KN

      In order to comprehend and meet the diverse requirements of esteemed clients, we are able to offer Computerized Universal Testing Machine. The offered range of computerized universal testing machines is made utilizing high grade raw material and innovative techniques in complete adherence with the international quality norms and standards. Along with this, the offered range of computerized universal testing machines is tested on different characteristics to maintain its authenticity throughout the designing process.


      Features:

      • Fully automatic
      • Accurate results
      • User friendly
      • adherence with the international quality norms and standards
      Request
      Callback


      Additional Information:

      • Item Code: ComputerizedUniversalTestingMachine
      • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
      • Port of Dispatch: MUNDRA
      • Production Capacity: 20 PER MONTH
      • Delivery Time: 6/8 WEEKS
      • Packaging Details: wooden Box
      Yes! I am Interested

      universal testing machine manufacturer computerized

      universal testing machine manufacturer computerized
      • universal testing machine manufacturer computerized
      • universal testing machine manufacturer computerized
      Ask For Price
      Product Price :Get Latest Price

      Product Details:

      Minimum Order Quantity1 Set
      ParameterKN,N,LBS,Kgf
      Machine Typeuniversal testing machine computerized
      Usage/ApplicationALL
      Model Name/Number201T
      Driving MethodGear,Motor
      BrandKMI,KMI
      Display Typeuniversal testing machine Computerized
      Driven TypeGear,Motor
      Capacity100KN,Up to 200Kn
      Controluniversal testing machine Computerized
      Country of OriginMade in India
      Material for ConstructionMS,SS,Others
      Accuracy+/- 1% As per IS 1828

      universal testing machine manufacturercomputerized 

      1. Machine.
      Computer controlled equipment to test tensile strength and elongation of a wide range of materials. Compression, Bending,Flexural, Shearing Peeling, Tear & other tests are possible through special grips & fixtures.

      2. Force Measurement.

      By Electronic Load Cells of high accuracy. Two Load-cells are included, One each for higher and lower strength material.

      3. Elongation Measuring Device.

      Built-in Device.Measurement through cross - head movement by incremental encoder.For range & resolution,refer specification table.

      4. Batch Test Facility.

      For a Batch test - can furnish statistical analysis report in regard to minimum, maximum, mean and C.V% of strength and elongation.

      5. Cyclic Test Facility.

      Particularly Suitable For rubber belting .Automatic loading and unloading of specimen for desired number of cycles.( Maximum 999 cycles) Specimen can be stretched between given load or elongation limit - with 5% tolerance.

      6. Proof Test Facility.

      Direct indication of proof load at selectable percentage of specimen gauge length.

      7. Measuring Unit.

      Force Value Display in gm & kgf and print-out in selectable unit - gm, kg, N, cN, kN Or Lbs.

      Elongation. Display in mm and printout in mm or Inch.

      8. Test Result.

      Display. During test all relevant test data including Load - Elongation Curve displayed on Computer screen. Print-out Test Report with Load - Elongation Curve can be had on completion of test .

      9. Graph.

      Load v/s Elongation & Stress V/S strain graphs. Auto scaling before print out. Special graph against specific need can be provided.

      For desired force value , corresponding elongation value & vice-versa can be directly seen on screen.

      10. Cross-head Drive & Speeds.

      Variable test speed through variable frequency A.C.Drive.

      For speed range refer table. Speed selection through computer key board.

      Other speeds can be offered, On cost basis against specific requirement
      11.Testing Lower Strength Materials.

      For testing lower strength material additional load-cell can be provided on cost basis.

      12. Protections.

      Overload & Over travel protection. Automatic stopping on specimen ruptures.

      13. Accuracy.

      + 1% of the verification load OR + 0.2% of rated capacity of range employed, which-ever is greater. Complying IS 1828 ( part 1) : 1991 /ISO 7500 – 1 : 1986

      Request
      Callback


      Additional Information:

      • Production Capacity: 20 per Month
      • Delivery Time: 4/6 weeks
      • Packaging Details: wooden Box
      Yes! I am Interested

      Universal Testing Machines

      Universal Testing Machines
      • Universal Testing Machines
      • Universal Testing Machines
      • Universal Testing Machines
      • Universal Testing Machines
      Ask For Price
      Product Price :Get Latest Price
      Product Brochure

      Product Details:

      Minimum Order Quantity1 Set
      Model Name/Number201T
      Capacityupto 200 KN,1kgf to 200KN
      MaterialALL
      Usage/ApplicationALL
      Automation GradeAutomatic
      Driving MethodGear ,Motor
      Accuracy+/- 1% As per IS 1828
      Place Of OriginINDIA
      BrandKMI
      Power SourceElectric
      Material for ConstructionMS,SS,others

      Our clients are offered with an extensive range of Universal  Testing machines that are widely used by all our clients. These are fabricated out of the best quality of raw materials so that they ensure to serve for the best possible time. Our range of universal and mechanical testing machines include, yarn testing machines, mechanical tensile testing machines, tensile testing machines, computerized testing machines and universal testing machines.

      1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

      2) Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

      3) Speed of the machine can be regulated through computerized systems.

      4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost

      Request
      Callback


      Additional Information:

      • Item Code: UniversalTestingMachine
      • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
      • Port of Dispatch: MUNDRA
      • Production Capacity: 20 PER MONTH
      • Delivery Time: 6/8 WEEKS
      • Packaging Details: wooden Box
      Yes! I am Interested

      Kmi Universal Testing Machines

      Kmi Universal Testing Machines
      • Kmi Universal Testing Machines
      • Kmi Universal Testing Machines
      Ask For Price
      Product Price :Get Latest Price

      Product Details:

      Model Name/Number201T
      MaterialALL
      Usage/ApplicationIndustrial
      Automation GradeAutomatic
      Driving MethodGear motor
      Accuracy+/- 1% as per IS 1828
      Power230V AC + 10%, Single Phase 50 Hz. / 415V A.C. three Phase + 10%
      Place Of OriginINDIA
      Capacity100KN
      BrandKMI
      Accuracy+/- 1% as per IS 1828
      No. of Load Shells2

      We are manufacturing and supplying high precision Kmi Universal Testing Machines. It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.

      Features:-

      1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

      2)Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

      3)Speed of the machine can be regulated through computerized systems.

      4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost.

      Used for :-
      Determining tensile strength and elongation of

      • Textile
      • Rubber
      • Plastic
      • Cables And Conductors
      • Leather
      • Asbestos
      • Paper
      • Plywood
      • Metal And Other Material
      Request
      Callback


      Additional Information:

      • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
      • Port of Dispatch: Mumbai
      • Packaging Details: Wooden Box
      Yes! I am Interested

      Universal Spring Testing Machine

      Universal Spring Testing Machine
      • Universal Spring Testing Machine
      • Universal Spring Testing Machine
      Ask For Price
      Product Price :Get Latest Price

      Product Details:

      Model Name/Number201T
      Capacityup to 200KN
      MaterialALL
      Capactiy200KN
      BrandKMI
      Material for ConstructionMS,SS,Others
      Accuracy+/- 1% AS per IS 1828

      We are manufacturing and supplying high precision Universal Spring Testing Machines that are used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal and other material. It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.


      Used for
      :-

      Determining tensile strength and elongation of

      • Textile
      • Rubber
      • Plastic
      • Cables and conductors
      • Leather
      • Asbestos
      • Paper
      • Plywood
      • Metal and other material
      Request
      Callback
      Yes! I am Interested

      Universal Tensile Testing Machines by KMI

      Universal Tensile Testing Machines by KMI
      • Universal Tensile Testing Machines by KMI
      • Universal Tensile Testing Machines by KMI
      Ask For Price
      Product Price :Get Latest Price

      Product Details:

      Usage/ApplicationALL
      Model Name/Number201T
      MaterialALL
      Automation GradeAutomatic
      Operating ModeAutomatic
      Number Of Load CellsTWO
      Number Of ScrewsTWO
      Resolution4000 counts in each range
      Capacity200KN
      Accuracy+/- 1% As per IS 1828
      Material for ConstructionMS,SS,Others
      Power SourceElectric

      Universal Tensile Testing Machines by KMI


      1. Machine.
      Computer controlled equipment to test tensile strength and elongation of a wide range of materials. Compression, Bending,Flexural, Shearing Peeling, Tear & other tests are possible through special grips & fixtures.

      2. Force Measurement.

      By Electronic Load Cells of high accuracy. Two Load-cells are included, One each for higher and lower strength material.

      3. Elongation Measuring Device.

      Built-in Device.Measurement through cross - head movement by incremental encoder.For range & resolution,refer specification table.

      4. Batch Test Facility.

      For a Batch test - can furnish statistical analysis report in regard to minimum, maximum, mean and C.V% of strength and elongation.

      5. Cyclic Test Facility.

      Particularly Suitable For rubber belting .Automatic loading and unloading of specimen for desired number of cycles.( Maximum 999 cycles) Specimen can be stretched between given load or elongation limit - with 5% tolerance.

      6. Proof Test Facility.

      Direct indication of proof load at selectable percentage of specimen gauge length.

      7. Measuring Unit.

      Force Value Display in gm & kgf and print-out in selectable unit - gm, kg, N, cN, kN Or Lbs.

      Elongation. Display in mm and printout in mm or Inch.

      8. Test Result.

      Display. During test all relevant test data including Load - Elongation Curve displayed on Computer screen. Print-out Test Report with Load - Elongation Curve can be had on completion of test .

      9. Graph.

      Load v/s Elongation & Stress V/S strain graphs. Auto scaling before print out. Special graph against specific need can be provided.

      For desired force value , corresponding elongation value & vice-versa can be directly seen on screen.

      10. Cross-head Drive & Speeds.

      Variable test speed through variable frequency A.C.Drive.

      For speed range refer table. Speed selection through computer key board.

      Other speeds can be offered, On cost basis against specific requirement
      11.Testing Lower Strength Materials.

      For testing lower strength material additional load-cell can be provided on cost basis.

      12. Protections.

      Overload & Over travel protection. Automatic stopping on specimen ruptures.

      13. Accuracy.

      + 1% of the verification load OR + 0.2% of rated capacity of range employed, which-ever is greater. Complying IS 1828 ( part 1) : 1991 /ISO 7500 – 1 : 1986

      Request
      Callback
      Yes! I am Interested

      KMI Universal Tensile Testing Machine

      KMI Universal Tensile Testing Machine
      • KMI Universal Tensile Testing Machine
      Ask For Price
      Product Price :Get Latest Price
      Product Brochure

      Product Details:

      Minimum Order Quantity1 Set
      Usage/ApplicationIndustrial
      Model Name/Number201T
      Capacityup to 200KN
      SizeDepending upon Capacity of machine
      MaterialALL
      Automation GradeAutomatic
      Operating ModeAutomatic
      PhaseSingle
      Number Of Load CellsTWo
      Number Of ScrewsTwo
      External Pc Connectionyes
      Distance Between GripDepending upon Capacity of machine
      DepthDepending upon Capacity of machine
      BrandKMI
      Accuracy+ 1% of the verification load OR + 0.2% of rated capacity of range employed
      Material for ConstructionMS,SS,others
      Power SourceElectric

      Universal Tensile Testing Machine


      1. Machine
      Computer controlled equipment to test tensile strength and elongation of a wide range of materials. Compression, Bending,Flexural, Shearing Peeling, Tear & other tests are possible through special grips & fixtures.

      2. Force Measurement

      By Electronic Load Cells of high accuracy. Two Load-cells are included, One each for higher and lower strength material.

      3. Elongation Measuring Device

      Built-in Device.Measurement through cross - head movement by incremental encoder. For range & resolution,refer specification table.

      4. Batch Test Facility.

      For a Batch test - can furnish statistical analysis report in regard to minimum, maximum, mean and C.V% of strength and elongation.

      5. Cyclic Test Facility.

      Particularly Suitable For rubber belting .Automatic loading and unloading of specimen for desired number of cycles.( Maximum 999 cycles) Specimen can be stretched between given load or elongation limit - with 5% tolerance.

      6. Proof Test Facility.

      Direct indication of proof load at selectable percentage of specimen gauge length.

      7. Measuring Unit.

      Force Value Display in gm & kgf and print-out in selectable unit - gm, kg, N, cN, kN Or Lbs.

      Elongation. Display in mm and printout in mm or Inch.

      8. Test Result.

      Display. During test all relevant test data including Load - Elongation Curve displayed on Computer screen. Print-out Test Report with Load - Elongation Curve can be had on completion of test .

      9. Graph.

      Load v/s Elongation & Stress V/S strain graphs. Auto scaling before print out. Special graph against specific need can be provided.

      For desired force value , corresponding elongation value & vice-versa can be directly seen on screen.

      10. Cross-head Drive & Speeds.

      Variable test speed through variable frequency A.C.Drive.

      For speed range refer table. Speed selection through computer key board.

      Other speeds can be offered, On cost basis against specific requirement
      11.Testing Lower Strength Materials.

      For testing lower strength material additional load-cell can be provided on cost basis.

      12. Protections.

      Overload & Over travel protection. Automatic stopping on specimen ruptures.

      13. Accuracy.

      + 1% of the verification load OR + 0.2% of rated capacity of range employed, which-ever is greater. Complying IS 1828 ( part 1) : 1991 /ISO 7500 – 1 : 1986

      Request
      Callback


      Additional Information:

      • Item Code: UniversalTensileTestingEquipment
      • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
      • Port of Dispatch: MUNDRA
      • Production Capacity: 20 PER MONTH
      • Delivery Time: 6/8 WEEKS
      • Packaging Details: wooden Box
      Yes! I am Interested

      Computer based Universal Testing Equipment for Industry

      Computer based Universal Testing Equipment for Industry
      • Computer based Universal Testing Equipment for Industry
      • Computer based Universal Testing Equipment for Industry
      Ask For Price
      Product Price :Get Latest Price

      Product Details:

      Machine TypeUTM
      Model Name/Number201T
      Automation GradeAutomatic
      Driving MethodGear,Motor
      Accuracy+/-1% As per IS 1828
      BrandKMI
      Place Of OriginINDIA
      Capacity100 kN
      BrandKMI
      Material for ConstructionMS,SS,Others
      Accuracy+/- 1%

      We are manufacturing and supplying high precision Computerized Universal Testing Equipment for Industry that are used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal, and other material. With capacity upto100 KN, it can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.

      Features:-

      • Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).
      • Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.
      • Speed of the machine can be regulated through computerized systems.
      • Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost
      Request
      Callback
      Yes! I am Interested

      Computerized Universal Tensile Testing Equipment

      Computerized Universal Tensile Testing Equipment
      • Computerized Universal Tensile Testing Equipment
      • Computerized Universal Tensile Testing Equipment
      Ask For Price
      Product Price :Get Latest Price

      Product Details:

      Usage/ApplicationALL
      MaterialALL
      Display TypeComputerized
      BrandKMI
      Automation GradeAutomatic
      Operating ModeAutomatic
      PhaseSingle
      Accuracy+/- 1% AS per IS 1828
      Number Of Load CellsTWO
      Number Of ScrewsTWO
      Capacityupto200 KN
      Material for ConstructionMS,SS,Others
      Power SourceElectric
      BrandKMI
      Accuracy+/- 1% As per IS 1828

      We are manufacturing and supplying high precision Computerized Universal Tensile Testing Equipment that are used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal, and other material. It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.

      1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

      2) Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

      3) Speed of the machine can be regulated through computerized systems.

      4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost
        Request
        Callback
        Yes! I am Interested

        Universal Tensile Testing Machine

        Universal Tensile Testing Machine
        • Universal Tensile Testing Machine
        • Universal Tensile Testing Machine
        Ask For Price
        Product Price :Get Latest Price

        Product Details:

        Usage/ApplicationALL
        Model Name/Number201T
        Capacityup to 200KN
        MaterialALL
        Automation GradeAutomatic
        Operating ModeAutomatic
        PhaseSingle
        Number Of Load CellsTWO
        Number Of ScrewsTWO
        CapactityUpto 200KN
        DisplayDigital
        Computer SupportAvailable
        BrandKMI

        We are manufacturing and supplying high precision Universal Tensile Testing Machine. 

        Features :-

        • Computerized Universal Testing Machine with Hydraulic Straining Unit
        • Micro Processor based version is also available
        • Accurate testing results

        Used for :-
        Determining tensile strength and elongation of
        • textile
        • rubber
        • plastic
        • cables and conductors
        • leather
        • asbestos
        • paper
        • plywood
        • metal and other material
        Request
        Callback
        Yes! I am Interested

        Universal Multi Material Tensile Testing Machine

        Universal Multi Material Tensile Testing Machine
        • Universal Multi Material Tensile Testing Machine
        • Universal Multi Material Tensile Testing Machine
        Ask For Price
        Product Price :Get Latest Price

        Product Details:

        Usage/ApplicationALL
        MaterialALL
        PhaseSingle Phase
        Display TypeComputerized
        BrandKMI
        Operating ModeAutomatic
        Accuracy+/- 1% As per IS 1828
        Number Of Load CellsTWo
        Number Of ScrewsTWo
        Resolution4000 counts in each range
        Capacity50 kN
        Material for ConstructionMS,SS,Others
        BrandKMI
        Power SourceElectric

        We are manufacturing and supplying high precision Universal Multi Material Tensile Testing Machine that are used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal and other material. It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.

        The range includes :

        • Computerized Universal Testing Machine with Hydraulic Straining Unit
        • Micro Processor based version is also available
        Request
        Callback
        Yes! I am Interested

        Paper Testing Equipment

        Paper Testing Equipment
        • Paper Testing Equipment
        Ask For Price
        Product Price :Get Latest Price

        Product Details:

        Grade1
        Display TypeComputerized
        BrandKMI
        MaterialMS,SS,Others
        CapacityUpto 200KN
        Accuracy+/- 1% As per IS 1828
        BrandKMI
        Material for ConstructionMS,SS,others
        No. of Load shells2

        Paper Testing Equipment is a sophisticated computerized version. Have all features of Microprocessor based equipment.


        Plus many advanced features like :-

        • Proof test cyclic test facility.
        • Software for statistical analysis.
        • Finer load resolution 4000 counts.
        • Variable speed AC Drive.
        • Permanent data storage facility.
        • Custom-built software for specific need etc. 
        Request
        Callback
        Yes! I am Interested

        Universal Testing Machine UTM

        Universal Testing Machine UTM
        • Universal Testing Machine UTM
        • Universal Testing Machine UTM
        Ask For Price
        Product Price :Get Latest Price

        Product Details:

        Machine Typecomputerized
        BrandKMI
        Usage/ApplicationALL Industries &Collages
        Model102C
        UsageLaboratory, Industrial
        Automation GradeAutomatic
        Model Name/Number201T
        Grade1
        Featuresunlimited data saving with bath mode
        Accuracy+/- 1% As per IS 1828
        Motor Power3HP
        Place Of OriginIndia
        WeightApprox weight*(1500kgf)
        Capacity100KN
        Material for ConstructionMS.SS.others

        Our clients are offered with an extensive range of Universal Testing Machines UTM that are widely used by all our clients. These are fabricated out of the best quality of raw materials so that they ensure to serve for the best possible time. We are leading manufacturer and exporter of high precision range of testing equipment and machineries for all type of materials, over 3 decades with more than 10000 satisfied customer all over the world.

        It can test material in conformity with IS or other standard. We are pioneer in the manufacturing of tensile testing machine in India , that is used for accurate testing results.


        Used for
        :-

        Determining tensile strength and elongation of

        • textile
        • rubber
        • plastic
        • cables and conductors
        • leather
        • asbestos
        • paper
        • plywood
        • metal and other material
        Request
        Callback


        Additional Information:

        • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
        • Port of Dispatch: MUMBAI
        • Packaging Details: Wooden Case
        Yes! I am Interested

        Universal Tensile & Compression Tester

        Universal Tensile & Compression Tester
        • Universal Tensile & Compression Tester
        Ask For Price
        Product Price :Get Latest Price
        Product Brochure

        Product Details:

        Minimum Order Quantity1 Piece
        Usage/ApplicationUniversal Tensile & Compression Tester
        Brand kmi
        Computer SupportAvailable
        Material for Construction Stainless steel
        Power SourceElectric
        Capacity100KN

        Our clients are offered with an extensive range of Universal Tensile & Compression Tester that are widely used by all our clients. Our range of universal and mechanical testing machines include, yarn testing machines, mechanical tensile testing machines, tensile testing machines, computerized testing machines and universal testing machines.

        Features :-

        1) Facility to have multiple numbers of load cells thus giving wide range of coverage with better accuracy at higher and lower load ranges with minimum resolutions (least count).

        2) Special facility for mounting additional load cells as a result of which there is no need to change either load cells or grips on the machine.

        3) Speed of the machine can be regulated through computerized systems.

        4) Unlimited storage facility of records files with an option of custom built software which can be supplied at extra cost
        5) Used for determining tensile strength and elongation of textile, rubber, plastic, cables and conductors, leather, asbestos, paper, plywood, metal and other material.


        Universal Tensile & Compression Tester

        • High Quality
        • Constant Servi
        • Competitive Price
        • More than 10000 satisfied clients
        Request
        Callback


        Additional Information:

        • Pay Mode Terms: L/C (Letter of Credit)
        • Delivery Time: 6 to 8 Weeks
        • Packaging Details: Wooden Case
        Yes! I am Interested

        Electronic Universal Tester

        Electronic Universal Tester
        • Electronic Universal Tester
        • Electronic Universal Tester
        Ask For Price
        Product Price :Get Latest Price

        Product Details:

        Machine TypeComputerize
        Usage/ApplicationLaboratory
        BrandKMI
        Model Name/Number201T
        FeaturesALL In One machine (Universal testing Machine)with pin point accuracy
        Display TypeComputerized
        Driven TypeGear ,Motor
        MaterialMS,SS,Others
        Measuring Range1Kgf To 200KN
        PhaseSingle
        Capacity200KN
        Accuracy+ 1% of the verification load OR + 0.2% of rated capacity of range employed
        Material for ConstructionMS,SS,Others
        Power SourceElectric

        Electronic Universal Tester

        1. Machine
        Computer controlled equipment to test tensile strength and elongation of a wide range of materials. Compression, Bending,Flexural, Shearing Peeling, Tear & other tests are possible through special grips & fixtures.

        2.Force Measurement

        By Electronic Load Cells of high accuracy. Two Load-cells are included, One each for higher and lower strength material.

        3. Elongation Measuring Device

        Built-in Device.Measurement through cross - head movement by incremental encoder. For range & resolution,refer specification table.

        4. Batch Test Facility

        For a Batch test - can furnish statistical analysis report in regard to minimum, maximum, mean and C.V% of strength and elongation.

        5. Cyclic Test Facility

        Particularly Suitable For rubber belting .Automatic loading and unloading of specimen for desired number of cycles.( Maximum 999 cycles) Specimen can be stretched between given load or elongation limit - with 5% tolerance.

        6. Proof Test Facility

        Direct indication of proof load at selectable percentage of specimen gauge length.

        7. Measuring Unit

        Force Value Display in gm & kgf and print-out in selectable unit - gm, kg, N, cN, kN Or Lbs.

        Elongation. Display in mm and printout in mm or Inch.

        8. Test Result

        Display. During test all relevant test data including Load - Elongation Curve displayed on Computer screen. Print-out Test Report with Load - Elongation Curve can be had on completion of test .

        9. Graph

        Load v/s Elongation & Stress V/S strain graphs. Auto scaling before print out. Special graph against specific need can be provided.

        For desired force value , corresponding elongation value & vice-versa can be directly seen on screen.

        10. Cross-head Drive & Speeds

        Variable test speed through variable frequency A.C.Drive.

        For speed range refer table. Speed selection through computer key board.

        Other speeds can be offered, On cost basis against specific requirement.
        11. Testing Lower Strength Materials

        For testing lower strength material additional load-cell can be provided on cost basis.

        12. Protections

        Overload & Over travel protection. Automatic stopping on specimen ruptures.

        13.Accuracy

        Complying IS 1828 ( part 1) : 1991 /ISO 7500 – 1 : 1986

        Request
        Callback
        Yes! I am Interested

        Coefficient Of Friction Cof Tester on UTM

        Coefficient Of Friction Cof Tester on UTM
        • Coefficient Of Friction Cof Tester on UTM
        Ask For Price
        Product Price :Get Latest Price

        Product Details:

        Minimum Order Quantity1 Set
        BrandKMI
        Automation GradeAutomatic
        Display TypeComputerized
        I Deal InNew Only
        Country of OriginMade in India

        ASTM D1894 Coefficient of Friction Test on Plastic on KMI UTM(Model 201T)

        Coefficient Of Friction Cof Tester on  KMI UTM 

        Request
        Callback


        Additional Information:

        • Production Capacity: 50 per month
        • Delivery Time: 4/6 weeks
        • Packaging Details: wooden boxes
        Yes! I am Interested
        X

        Product Videos

        Watch More Videos

        Explore More Product

        View All Product


        Reach Us
        Mahesh Shah (Partner)
        Kamal Metal Industries
        No. 3, Subhash Industrial Estate, Ramol Road, C. T. M.
        Amraiwadi, Ahmedabad - 380026, Gujarat, India


        Call Us


        Send E-mail